1. 漏洞描述

The Linux Kernel, the operating system core itself.

Security Fix(es):

In the Linux kernel, the following vulnerability has been resolved:

ibmvnic: don't release napi in __ibmvnic_open()

If __ibmvnic_open() encounters an error such as when setting link state,
it calls release_resources() which frees the napi structures needlessly.
Instead, have __ibmvnic_open() only clean up the work it did so far (i.e.
disable napi and irqs) and leave the rest to the callers.

If caller of __ibmvnic_open() is ibmvnic_open(), it should release the
resources immediately. If the caller is do_reset() or do_hard_reset(),
they will release the resources on the next reset.

This fixes following crash that occurred when running the drmgr command
several times to add/remove a vnic interface:

[102056] ibmvnic 30000003 env3: Disabling rx_scrq[6] irq
[102056] ibmvnic 30000003 env3: Disabling rx_scrq[7] irq
[102056] ibmvnic 30000003 env3: Replenished 8 pools
Kernel attempted to read user page (10) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000010
Faulting instruction address: 0xc000000000a3c840
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
...
CPU: 9 PID: 102056 Comm: kworker/9:2 Kdump: loaded Not tainted 5.16.0-rc5-autotest-g6441998e2e37 #1
Workqueue: events_long __ibmvnic_reset [ibmvnic]
NIP: c000000000a3c840 LR: c0080000029b5378 CTR: c000000000a3c820
REGS: c0000000548e37e0 TRAP: 0300 Not tainted (5.16.0-rc5-autotest-g6441998e2e37)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 28248484 XER: 00000004
CFAR: c0080000029bdd24 DAR: 0000000000000010 DSISR: 40000000 IRQMASK: 0
GPR00: c0080000029b55d0 c0000000548e3a80 c0000000028f0200 0000000000000000
...
NIP [c000000000a3c840] napi_enable+0x20/0xc0
LR [c0080000029b5378] __ibmvnic_open+0xf0/0x430 [ibmvnic]
Call Trace:
[c0000000548e3a80] [0000000000000006] 0x6 (unreliable)
[c0000000548e3ab0] [c0080000029b55d0] __ibmvnic_open+0x348/0x430 [ibmvnic]
[c0000000548e3b40] [c0080000029bcc28] __ibmvnic_reset+0x500/0xdf0 [ibmvnic]
[c0000000548e3c60] [c000000000176228] process_one_work+0x288/0x570
[c0000000548e3d00] [c000000000176588] worker_thread+0x78/0x660
[c0000000548e3da0] [c0000000001822f0] kthread+0x1c0/0x1d0
[c0000000548e3e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
7d2948f8 792307e0 4e800020 60000000 3c4c01eb 384239e0 f821ffd1 39430010
38a0fff6 e92d1100 f9210028 39200000 <e9030010> f9010020 60420000 e9210020
---[ end trace 5f8033b08fd27706 ]---(CVE-2022-48811)

In the Linux kernel, the following vulnerability has been resolved:

tty: serial: qcom-geni-serial: fix slab-out-of-bounds on RX FIFO buffer

Driver's probe allocates memory for RX FIFO (port->rx_fifo) based on
default RX FIFO depth, e.g. 16. Later during serial startup the
qcom_geni_serial_port_setup() updates the RX FIFO depth
(port->rx_fifo_depth) to match real device capabilities, e.g. to 32.

The RX UART handle code will read "port->rx_fifo_depth" number of words
into "port->rx_fifo" buffer, thus exceeding the bounds. This can be
observed in certain configurations with Qualcomm Bluetooth HCI UART
device and KASAN:

Bluetooth: hci0: QCA Product ID :0x00000010
Bluetooth: hci0: QCA SOC Version :0x400a0200
Bluetooth: hci0: QCA ROM Version :0x00000200
Bluetooth: hci0: QCA Patch Version:0x00000d2b
Bluetooth: hci0: QCA controller version 0x02000200
Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv
bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2
Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2)
Bluetooth: hci0: QCA Failed to download patch (-2)
==================================================================
BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c
Write of size 4 at addr ffff279347d578c0 by task swapper/0/0

CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Call trace:
dump_backtrace.part.0+0xe0/0xf0
show_stack+0x18/0x40
dump_stack_lvl+0x8c/0xb8
print_report+0x188/0x488
kasan_report+0xb4/0x100
__asan_store4+0x80/0xa4
handle_rx_uart+0xa8/0x18c
qcom_geni_serial_handle_rx+0x84/0x9c
qcom_geni_serial_isr+0x24c/0x760
__handle_irq_event_percpu+0x108/0x500
handle_irq_event+0x6c/0x110
handle_fasteoi_irq+0x138/0x2cc
generic_handle_domain_irq+0x48/0x64

If the RX FIFO depth changes after probe, be sure to resize the buffer.(CVE-2022-48871)

In the Linux kernel, the following vulnerability has been resolved:

wifi: mac80211: sdata can be NULL during AMPDU start

ieee80211_tx_ba_session_handle_start() may get NULL for sdata when a
deauthentication is ongoing.

Here a trace triggering the race with the hostapd test
multi_ap_fronthaul_on_ap:

(gdb) list *drv_ampdu_action+0x46
0x8b16 is in drv_ampdu_action (net/mac80211/driver-ops.c:396).
391 int ret = -EOPNOTSUPP;
392
393 might_sleep();
394
395 sdata = get_bss_sdata(sdata);
396 if (!check_sdata_in_driver(sdata))
397 return -EIO;
398
399 trace_drv_ampdu_action(local, sdata, params);
400

wlan0: moving STA 02:00:00:00:03:00 to state 3
wlan0: associated
wlan0: deauthenticating from 02:00:00:00:03:00 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan3.sta1: Open BA session requested for 02:00:00:00:00:00 tid 0
wlan3.sta1: dropped frame to 02:00:00:00:00:00 (unauthorized port)
wlan0: moving STA 02:00:00:00:03:00 to state 2
wlan0: moving STA 02:00:00:00:03:00 to state 1
wlan0: Removed STA 02:00:00:00:03:00
wlan0: Destroyed STA 02:00:00:00:03:00
BUG: unable to handle page fault for address: fffffffffffffb48
PGD 11814067 P4D 11814067 PUD 11816067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 2 PID: 133397 Comm: kworker/u16:1 Tainted: G W 6.1.0-rc8-wt+ #59
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
Workqueue: phy3 ieee80211_ba_session_work [mac80211]
RIP: 0010:drv_ampdu_action+0x46/0x280 [mac80211]
Code: 53 48 89 f3 be 89 01 00 00 e8 d6 43 bf ef e8 21 46 81 f0 83 bb a0 1b 00 00 04 75 0e 48 8b 9b 28 0d 00 00 48 81 eb 10 0e 00 00 <8b> 93 58 09 00 00 f6 c2 20 0f 84 3b 01 00 00 8b 05 dd 1c 0f 00 85
RSP: 0018:ffffc900025ebd20 EFLAGS: 00010287
RAX: 0000000000000000 RBX: fffffffffffff1f0 RCX: ffff888102228240
RDX: 0000000080000000 RSI: ffffffff918c5de0 RDI: ffff888102228b40
RBP: ffffc900025ebd40 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: ffff888118c18ec0
R13: 0000000000000000 R14: ffffc900025ebd60 R15: ffff888018b7efb8
FS: 0000000000000000(0000) GS:ffff88817a600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffffffffffb48 CR3: 0000000105228006 CR4: 0000000000170ee0
Call Trace:
<TASK>
ieee80211_tx_ba_session_handle_start+0xd0/0x190 [mac80211]
ieee80211_ba_session_work+0xff/0x2e0 [mac80211]
process_one_work+0x29f/0x620
worker_thread+0x4d/0x3d0
? process_one_work+0x620/0x620
kthread+0xfb/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>(CVE-2022-48875)

In the Linux kernel, the following vulnerability has been resolved:

f2fs: let's avoid panic if extent_tree is not created

This patch avoids the below panic.

pc : __lookup_extent_tree+0xd8/0x760
lr : f2fs_do_write_data_page+0x104/0x87c
sp : ffffffc010cbb3c0
x29: ffffffc010cbb3e0 x28: 0000000000000000
x27: ffffff8803e7f020 x26: ffffff8803e7ed40
x25: ffffff8803e7f020 x24: ffffffc010cbb460
x23: ffffffc010cbb480 x22: 0000000000000000
x21: 0000000000000000 x20: ffffffff22e90900
x19: 0000000000000000 x18: ffffffc010c5d080
x17: 0000000000000000 x16: 0000000000000020
x15: ffffffdb1acdbb88 x14: ffffff888759e2b0
x13: 0000000000000000 x12: ffffff802da49000
x11: 000000000a001200 x10: ffffff8803e7ed40
x9 : ffffff8023195800 x8 : ffffff802da49078
x7 : 0000000000000001 x6 : 0000000000000000
x5 : 0000000000000006 x4 : ffffffc010cbba28
x3 : 0000000000000000 x2 : ffffffc010cbb480
x1 : 0000000000000000 x0 : ffffff8803e7ed40
Call trace:
__lookup_extent_tree+0xd8/0x760
f2fs_do_write_data_page+0x104/0x87c
f2fs_write_single_data_page+0x420/0xb60
f2fs_write_cache_pages+0x418/0xb1c
__f2fs_write_data_pages+0x428/0x58c
f2fs_write_data_pages+0x30/0x40
do_writepages+0x88/0x190
__writeback_single_inode+0x48/0x448
writeback_sb_inodes+0x468/0x9e8
__writeback_inodes_wb+0xb8/0x2a4
wb_writeback+0x33c/0x740
wb_do_writeback+0x2b4/0x400
wb_workfn+0xe4/0x34c
process_one_work+0x24c/0x5bc
worker_thread+0x3e8/0xa50
kthread+0x150/0x1b4(CVE-2022-48877)

In the Linux kernel, the following vulnerability has been resolved:

regulator: da9211: Use irq handler when ready

If the system does not come from reset (like when it is kexec()), the
regulator might have an IRQ waiting for us.

If we enable the IRQ handler before its structures are ready, we crash.

This patch fixes:

[ 1.141839] Unable to handle kernel read from unreadable memory at virtual address 0000000000000078
[ 1.316096] Call trace:
[ 1.316101] blocking_notifier_call_chain+0x20/0xa8
[ 1.322757] cpu cpu0: dummy supplies not allowed for exclusive requests
[ 1.327823] regulator_notifier_call_chain+0x1c/0x2c
[ 1.327825] da9211_irq_handler+0x68/0xf8
[ 1.327829] irq_thread+0x11c/0x234
[ 1.327833] kthread+0x13c/0x154(CVE-2022-48891)

In the Linux kernel, the following vulnerability has been resolved:

apparmor: Fix null pointer deref when receiving skb during sock creation

The panic below is observed when receiving ICMP packets with secmark set
while an ICMP raw socket is being created. SK_CTX(sk)->label is updated
in apparmor_socket_post_create(), but the packet is delivered to the
socket before that, causing the null pointer dereference.
Drop the packet if label context is not set.

BUG: kernel NULL pointer dereference, address: 000000000000004c
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 407 Comm: a.out Not tainted 6.4.12-arch1-1 #1 3e6fa2753a2d75925c34ecb78e22e85a65d083df
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/28/2020
RIP: 0010:aa_label_next_confined+0xb/0x40
Code: 00 00 48 89 ef e8 d5 25 0c 00 e9 66 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 89 f0 <8b> 77 4c 39 c6 7e 1f 48 63 d0 48 8d 14 d7 eb 0b 83 c0 01 48 83 c2
RSP: 0018:ffffa92940003b08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000e
RDX: ffffa92940003be8 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff8b57471e7800 R08: ffff8b574c642400 R09: 0000000000000002
R10: ffffffffbd820eeb R11: ffffffffbeb7ff00 R12: ffff8b574c642400
R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000
FS: 00007fb092ea7640(0000) GS:ffff8b577bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000004c CR3: 00000001020f2005 CR4: 00000000007706f0
PKRU: 55555554
Call Trace:
<IRQ>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? exc_page_fault+0x7f/0x180
? asm_exc_page_fault+0x26/0x30
? aa_label_next_confined+0xb/0x40
apparmor_secmark_check+0xec/0x330
security_sock_rcv_skb+0x35/0x50
sk_filter_trim_cap+0x47/0x250
sock_queue_rcv_skb_reason+0x20/0x60
raw_rcv+0x13c/0x210
raw_local_deliver+0x1f3/0x250
ip_protocol_deliver_rcu+0x4f/0x2f0
ip_local_deliver_finish+0x76/0xa0
__netif_receive_skb_one_core+0x89/0xa0
netif_receive_skb+0x119/0x170
? __netdev_alloc_skb+0x3d/0x140
vmxnet3_rq_rx_complete+0xb23/0x1010 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a]
vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a]
__napi_poll+0x28/0x1b0
net_rx_action+0x2a4/0x380
__do_softirq+0xd1/0x2c8
__irq_exit_rcu+0xbb/0xf0
common_interrupt+0x86/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x26/0x40
RIP: 0010:apparmor_socket_post_create+0xb/0x200
Code: 08 48 85 ff 75 a1 eb b1 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 <55> 48 89 fd 53 45 85 c0 0f 84 b2 00 00 00 48 8b 1d 80 56 3f 02 48
RSP: 0018:ffffa92940ce7e50 EFLAGS: 00000286
RAX: ffffffffbc756440 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff8b574eaab740
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: ffff8b57444cec70 R11: 0000000000000000 R12: 0000000000000003
R13: 0000000000000002 R14: ffff8b574eaab740 R15: ffffffffbd8e4748
? __pfx_apparmor_socket_post_create+0x10/0x10
security_socket_post_create+0x4b/0x80
__sock_create+0x176/0x1f0
__sys_socket+0x89/0x100
__x64_sys_socket+0x17/0x20
do_syscall_64+0x5d/0x90
? do_syscall_64+0x6c/0x90
? do_syscall_64+0x6c/0x90
? do_syscall_64+0x6c/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc(CVE-2023-52889)

In the Linux kernel, the following vulnerability has been resolved:

btrfs: fix race between quota rescan and disable leading to NULL pointer deref

If we have one task trying to start the quota rescan worker while another
one is trying to disable quotas, we can end up hitting a race that results
in the quota rescan worker doing a NULL pointer dereference. The steps for
this are the following:

1) Quotas are enabled;

2) Task A calls the quota rescan ioctl and enters btrfs_qgroup_rescan().
It calls qgroup_rescan_init() which returns 0 (success) and then joins a
transaction and commits it;

3) Task B calls the quota disable ioctl and enters btrfs_quota_disable().
It clears the bit BTRFS_FS_QUOTA_ENABLED from fs_info->flags and calls
btrfs_qgroup_wait_for_completion(), which returns immediately since the
rescan worker is not yet running.
Then it starts a transaction and locks fs_info->qgroup_ioctl_lock;

4) Task A queues the rescan worker, by calling btrfs_queue_work();

5) The rescan worker starts, and calls rescan_should_stop() at the start
of its while loop, which results in 0 iterations of the loop, since
the flag BTRFS_FS_QUOTA_ENABLED was cleared from fs_info->flags by
task B at step 3);

6) Task B sets fs_info->quota_root to NULL;

7) The rescan worker tries to start a transaction and uses
fs_info->quota_root as the root argument for btrfs_start_transaction().
This results in a NULL pointer dereference down the call chain of
btrfs_start_transaction(). The stack trace is something like the one
reported in Link tag below:

general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f]
CPU: 1 PID: 34 Comm: kworker/u4:2 Not tainted 6.1.0-syzkaller-13872-gb6bb9676f216 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: btrfs-qgroup-rescan btrfs_work_helper
RIP: 0010:start_transaction+0x48/0x10f0 fs/btrfs/transaction.c:564
Code: 48 89 fb 48 (...)
RSP: 0018:ffffc90000ab7ab0 EFLAGS: 00010206
RAX: 0000000000000041 RBX: 0000000000000208 RCX: ffff88801779ba80
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: dffffc0000000000 R08: 0000000000000001 R09: fffff52000156f5d
R10: fffff52000156f5d R11: 1ffff92000156f5c R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2bea75b718 CR3: 000000001d0cc000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
btrfs_qgroup_rescan_worker+0x3bb/0x6a0 fs/btrfs/qgroup.c:3402
btrfs_work_helper+0x312/0x850 fs/btrfs/async-thread.c:280
process_one_work+0x877/0xdb0 kernel/workqueue.c:2289
worker_thread+0xb14/0x1330 kernel/workqueue.c:2436
kthread+0x266/0x300 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
</TASK>
Modules linked in:

So fix this by having the rescan worker function not attempt to start a
transaction if it didn't do any rescan work.(CVE-2023-52896)

In the Linux kernel, the following vulnerability has been resolved:

Add exception protection processing for vd in axi_chan_handle_err function

Since there is no protection for vd, a kernel panic will be
triggered here in exceptional cases.

You can refer to the processing of axi_chan_block_xfer_complete function

The triggered kernel panic is as follows:

[ 67.848444] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060
[ 67.848447] Mem abort info:
[ 67.848449] ESR = 0x96000004
[ 67.848451] EC = 0x25: DABT (current EL), IL = 32 bits
[ 67.848454] SET = 0, FnV = 0
[ 67.848456] EA = 0, S1PTW = 0
[ 67.848458] Data abort info:
[ 67.848460] ISV = 0, ISS = 0x00000004
[ 67.848462] CM = 0, WnR = 0
[ 67.848465] user pgtable: 4k pages, 48-bit VAs, pgdp=00000800c4c0b000
[ 67.848468] [0000000000000060] pgd=0000000000000000, p4d=0000000000000000
[ 67.848472] Internal error: Oops: 96000004 [#1] SMP
[ 67.848475] Modules linked in: dmatest
[ 67.848479] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.100-emu_x2rc+ #11
[ 67.848483] pstate: 62000085 (nZCv daIf -PAN -UAO +TCO BTYPE=--)
[ 67.848487] pc : axi_chan_handle_err+0xc4/0x230
[ 67.848491] lr : axi_chan_handle_err+0x30/0x230
[ 67.848493] sp : ffff0803fe55ae50
[ 67.848495] x29: ffff0803fe55ae50 x28: ffff800011212200
[ 67.848500] x27: ffff0800c42c0080 x26: ffff0800c097c080
[ 67.848504] x25: ffff800010d33880 x24: ffff80001139d850
[ 67.848508] x23: ffff0800c097c168 x22: 0000000000000000
[ 67.848512] x21: 0000000000000080 x20: 0000000000002000
[ 67.848517] x19: ffff0800c097c080 x18: 0000000000000000
[ 67.848521] x17: 0000000000000000 x16: 0000000000000000
[ 67.848525] x15: 0000000000000000 x14: 0000000000000000
[ 67.848529] x13: 0000000000000000 x12: 0000000000000040
[ 67.848533] x11: ffff0800c0400248 x10: ffff0800c040024a
[ 67.848538] x9 : ffff800010576cd4 x8 : ffff0800c0400270
[ 67.848542] x7 : 0000000000000000 x6 : ffff0800c04003e0
[ 67.848546] x5 : ffff0800c0400248 x4 : ffff0800c4294480
[ 67.848550] x3 : dead000000000100 x2 : dead000000000122
[ 67.848555] x1 : 0000000000000100 x0 : ffff0800c097c168
[ 67.848559] Call trace:
[ 67.848562] axi_chan_handle_err+0xc4/0x230
[ 67.848566] dw_axi_dma_interrupt+0xf4/0x590
[ 67.848569] __handle_irq_event_percpu+0x60/0x220
[ 67.848573] handle_irq_event+0x64/0x120
[ 67.848576] handle_fasteoi_irq+0xc4/0x220
[ 67.848580] __handle_domain_irq+0x80/0xe0
[ 67.848583] gic_handle_irq+0xc0/0x138
[ 67.848585] el1_irq+0xc8/0x180
[ 67.848588] arch_cpu_idle+0x14/0x2c
[ 67.848591] default_idle_call+0x40/0x16c
[ 67.848594] do_idle+0x1f0/0x250
[ 67.848597] cpu_startup_entry+0x2c/0x60
[ 67.848600] rest_init+0xc0/0xcc
[ 67.848603] arch_call_rest_init+0x14/0x1c
[ 67.848606] start_kernel+0x4cc/0x500
[ 67.848610] Code: eb0002ff 9a9f12d6 f2fbd5a2 f2fbd5a3 (a94602c1)
[ 67.848613] ---[ end trace 585a97036f88203a ]---(CVE-2023-52899)

In the Linux kernel, the following vulnerability has been resolved:

net/sched: act_mpls: Fix warning during failed attribute validation

The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a
validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid
combination according to the comment above 'struct nla_policy':

"
Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN:
NLA_BINARY Validation function called for the attribute.
All other Unused - but note that it's a union
"

This can trigger the warning [1] in nla_get_range_unsigned() when
validation of the attribute fails. Despite being of 'NLA_U32' type, the
associated 'min'/'max' fields in the policy are negative as they are
aliased by the 'validate' field.

Fix by changing the attribute type to 'NLA_BINARY' which is consistent
with the above comment and all other users of NLA_POLICY_VALIDATE_FN().
As a result, move the length validation to the validation function.

No regressions in MPLS tests:

# ./tdc.py -f tc-tests/actions/mpls.json
[...]
# echo $?
0

[1]
WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118
nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
Modules linked in:
CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014
RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
[...]
Call Trace:
<TASK>
__netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310
netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411
netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline]
netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506
netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x38f/0x500 net/socket.c:2482
___sys_sendmsg net/socket.c:2536 [inline]
__sys_sendmsg+0x197/0x230 net/socket.c:2565
__do_sys_sendmsg net/socket.c:2574 [inline]
__se_sys_sendmsg net/socket.c:2572 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2572
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd(CVE-2023-52906)

In the Linux kernel, the following vulnerability has been resolved:

scsi: mpt3sas: Avoid test/set_bit() operating in non-allocated memory

There is a potential out-of-bounds access when using test_bit() on a single
word. The test_bit() and set_bit() functions operate on long values, and
when testing or setting a single word, they can exceed the word
boundary. KASAN detects this issue and produces a dump:

BUG: KASAN: slab-out-of-bounds in _scsih_add_device.constprop.0 (./arch/x86/include/asm/bitops.h:60 ./include/asm-generic/bitops/instrumented-atomic.h:29 drivers/scsi/mpt3sas/mpt3sas_scsih.c:7331) mpt3sas

Write of size 8 at addr ffff8881d26e3c60 by task kworker/u1536:2/2965

For full log, please look at [1].

Make the allocation at least the size of sizeof(unsigned long) so that
set_bit() and test_bit() have sufficient room for read/write operations
without overwriting unallocated memory.

[1] Link: https://lore.kernel.org/all/ZkNcALr3W3KGYYJG@gmail.com/(CVE-2024-40901)

In the Linux kernel, the following vulnerability has been resolved:

drm/amdgpu: change vm->task_info handling

This patch changes the handling and lifecycle of vm->task_info object.
The major changes are:
- vm->task_info is a dynamically allocated ptr now, and its uasge is
reference counted.
- introducing two new helper funcs for task_info lifecycle management
- amdgpu_vm_get_task_info: reference counts up task_info before
returning this info
- amdgpu_vm_put_task_info: reference counts down task_info
- last put to task_info() frees task_info from the vm.

This patch also does logistical changes required for existing usage
of vm->task_info.

V2: Do not block all the prints when task_info not found (Felix)

V3: Fixed review comments from Felix
- Fix wrong indentation
- No debug message for -ENOMEM
- Add NULL check for task_info
- Do not duplicate the debug messages (ti vs no ti)
- Get first reference of task_info in vm_init(), put last
in vm_fini()

V4: Fixed review comments from Felix
- fix double reference increment in create_task_info
- change amdgpu_vm_get_task_info_pasid
- additional changes in amdgpu_gem.c while porting(CVE-2024-41008)

In the Linux kernel, the following vulnerability has been resolved:

ocfs2: strict bound check before memcmp in ocfs2_xattr_find_entry()

xattr in ocfs2 maybe 'non-indexed', which saved with additional space
requested. It's better to check if the memory is out of bound before
memcmp, although this possibility mainly comes from crafted poisonous
images.(CVE-2024-41016)

In the Linux kernel, the following vulnerability has been resolved:

drm/radeon: check bo_va->bo is non-NULL before using it

The call to radeon_vm_clear_freed might clear bo_va->bo, so
we have to check it before dereferencing it.(CVE-2024-41060)

In the Linux kernel, the following vulnerability has been resolved:

nvme-fabrics: use reserved tag for reg read/write command

In some scenarios, if too many commands are issued by nvme command in
the same time by user tasks, this may exhaust all tags of admin_q. If
a reset (nvme reset or IO timeout) occurs before these commands finish,
reconnect routine may fail to update nvme regs due to insufficient tags,
which will cause kernel hang forever. In order to workaround this issue,
maybe we can let reg_read32()/reg_read64()/reg_write32() use reserved
tags. This maybe safe for nvmf:

1. For the disable ctrl path, we will not issue connect command
2. For the enable ctrl / fw activate path, since connect and reg_xx()
are called serially.

So the reserved tags may still be enough while reg_xx() use reserved tags.(CVE-2024-41082)

In the Linux kernel, the following vulnerability has been resolved:

i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr

When del_timer_sync() is called in an interrupt context it throws a warning
because of potential deadlock. The timer is used only to exit from
wait_for_completion() after a timeout so replacing the call with
wait_for_completion_timeout() allows to remove the problematic timer and
its related functions altogether.(CVE-2024-42153)

In the Linux kernel, the following vulnerability has been resolved:

powerpc/pseries: Fix scv instruction crash with kexec

kexec on pseries disables AIL (reloc_on_exc), required for scv
instruction support, before other CPUs have been shut down. This means
they can execute scv instructions after AIL is disabled, which causes an
interrupt at an unexpected entry location that crashes the kernel.

Change the kexec sequence to disable AIL after other CPUs have been
brought down.

As a refresher, the real-mode scv interrupt vector is 0x17000, and the
fixed-location head code probably couldn't easily deal with implementing
such high addresses so it was just decided not to support that interrupt
at all.(CVE-2024-42230)

In the Linux kernel, the following vulnerability has been resolved:

scsi: qla2xxx: validate nvme_local_port correctly

The driver load failed with error message,

qla2xxx [0000:04:00.0]-ffff:0: register_localport failed: ret=ffffffef

and with a kernel crash,

BUG: unable to handle kernel NULL pointer dereference at 0000000000000070
Workqueue: events_unbound qla_register_fcport_fn [qla2xxx]
RIP: 0010:nvme_fc_register_remoteport+0x16/0x430 [nvme_fc]
RSP: 0018:ffffaaa040eb3d98 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff9dfb46b78c00 RCX: 0000000000000000
RDX: ffff9dfb46b78da8 RSI: ffffaaa040eb3e08 RDI: 0000000000000000
RBP: ffff9dfb612a0a58 R08: ffffffffaf1d6270 R09: 3a34303a30303030
R10: 34303a303030305b R11: 2078787832616c71 R12: ffff9dfb46b78dd4
R13: ffff9dfb46b78c24 R14: ffff9dfb41525300 R15: ffff9dfb46b78da8
FS: 0000000000000000(0000) GS:ffff9dfc67c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000070 CR3: 000000018da10004 CR4: 00000000000206f0
Call Trace:
qla_nvme_register_remote+0xeb/0x1f0 [qla2xxx]
? qla2x00_dfs_create_rport+0x231/0x270 [qla2xxx]
qla2x00_update_fcport+0x2a1/0x3c0 [qla2xxx]
qla_register_fcport_fn+0x54/0xc0 [qla2xxx]

Exit the qla_nvme_register_remote() function when qla_nvme_register_hba()
fails and correctly validate nvme_local_port.(CVE-2024-42286)

In the Linux kernel, the following vulnerability has been resolved:

scsi: qla2xxx: Fix for possible memory corruption

Init Control Block is dereferenced incorrectly. Correctly dereference ICB(CVE-2024-42288)

In the Linux kernel, the following vulnerability has been resolved:

nilfs2: handle inconsistent state in nilfs_btnode_create_block()

Syzbot reported that a buffer state inconsistency was detected in
nilfs_btnode_create_block(), triggering a kernel bug.

It is not appropriate to treat this inconsistency as a bug; it can occur
if the argument block address (the buffer index of the newly created
block) is a virtual block number and has been reallocated due to
corruption of the bitmap used to manage its allocation state.

So, modify nilfs_btnode_create_block() and its callers to treat it as a
possible filesystem error, rather than triggering a kernel bug.(CVE-2024-42295)

In the Linux kernel, the following vulnerability has been resolved:

fs/ntfs3: Update log->page_{mask,bits} if log->page_size changed

If an NTFS file system is mounted to another system with different
PAGE_SIZE from the original system, log->page_size will change in
log_replay(), but log->page_{mask,bits} don't change correspondingly.
This will cause a panic because "u32 bytes = log->page_size - page_off"
will get a negative value in the later read_log_page().(CVE-2024-42299)

In the Linux kernel, the following vulnerability has been resolved:

sysctl: always initialize i_uid/i_gid

Always initialize i_uid/i_gid inside the sysfs core so set_ownership()
can safely skip setting them.

Commit 5ec27ec735ba ("fs/proc/proc_sysctl.c: fix the default values of
i_uid/i_gid on /proc/sys inodes.") added defaults for i_uid/i_gid when
set_ownership() was not implemented. It also missed adjusting
net_ctl_set_ownership() to use the same default values in case the
computation of a better value failed.(CVE-2024-42312)

In the Linux kernel, the following vulnerability has been resolved:

PCI: endpoint: pci-epf-test: Make use of cached 'epc_features' in pci_epf_test_core_init()

Instead of getting the epc_features from pci_epc_get_features() API, use
the cached pci_epf_test::epc_features value to avoid the NULL check. Since
the NULL check is already performed in pci_epf_test_bind(), having one more
check in pci_epf_test_core_init() is redundant and it is not possible to
hit the NULL pointer dereference.

Also with commit a01e7214bef9 ("PCI: endpoint: Remove "core_init_notifier"
flag"), 'epc_features' got dereferenced without the NULL check, leading to
the following false positive Smatch warning:

drivers/pci/endpoint/functions/pci-epf-test.c:784 pci_epf_test_core_init() error: we previously assumed 'epc_features' could be null (see line 747)

Thus, remove the redundant NULL check and also use the epc_features::
{msix_capable/msi_capable} flags directly to avoid local variables.

[kwilczynski: commit log](CVE-2024-43824)

In the Linux kernel, the following vulnerability has been resolved:

xdp: fix invalid wait context of page_pool_destroy()

If the driver uses a page pool, it creates a page pool with
page_pool_create().
The reference count of page pool is 1 as default.
A page pool will be destroyed only when a reference count reaches 0.
page_pool_destroy() is used to destroy page pool, it decreases a
reference count.
When a page pool is destroyed, ->disconnect() is called, which is
mem_allocator_disconnect().
This function internally acquires mutex_lock().

If the driver uses XDP, it registers a memory model with
xdp_rxq_info_reg_mem_model().
The xdp_rxq_info_reg_mem_model() internally increases a page pool
reference count if a memory model is a page pool.
Now the reference count is 2.

To destroy a page pool, the driver should call both page_pool_destroy()
and xdp_unreg_mem_model().
The xdp_unreg_mem_model() internally calls page_pool_destroy().
Only page_pool_destroy() decreases a reference count.

If a driver calls page_pool_destroy() then xdp_unreg_mem_model(), we
will face an invalid wait context warning.
Because xdp_unreg_mem_model() calls page_pool_destroy() with
rcu_read_lock().
The page_pool_destroy() internally acquires mutex_lock().

Splat looks like:
=============================
[ BUG: Invalid wait context ]
6.10.0-rc6+ #4 Tainted: G W
-----------------------------
ethtool/1806 is trying to lock:
ffffffff90387b90 (mem_id_lock){+.+.}-{4:4}, at: mem_allocator_disconnect+0x73/0x150
other info that might help us debug this:
context-{5:5}
3 locks held by ethtool/1806:
stack backtrace:
CPU: 0 PID: 1806 Comm: ethtool Tainted: G W 6.10.0-rc6+ #4 f916f41f172891c800f2fed
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
Call Trace:
<TASK>
dump_stack_lvl+0x7e/0xc0
__lock_acquire+0x1681/0x4de0
? _printk+0x64/0xe0
? __pfx_mark_lock.part.0+0x10/0x10
? __pfx___lock_acquire+0x10/0x10
lock_acquire+0x1b3/0x580
? mem_allocator_disconnect+0x73/0x150
? __wake_up_klogd.part.0+0x16/0xc0
? __pfx_lock_acquire+0x10/0x10
? dump_stack_lvl+0x91/0xc0
__mutex_lock+0x15c/0x1690
? mem_allocator_disconnect+0x73/0x150
? __pfx_prb_read_valid+0x10/0x10
? mem_allocator_disconnect+0x73/0x150
? __pfx_llist_add_batch+0x10/0x10
? console_unlock+0x193/0x1b0
? lockdep_hardirqs_on+0xbe/0x140
? __pfx___mutex_lock+0x10/0x10
? tick_nohz_tick_stopped+0x16/0x90
? __irq_work_queue_local+0x1e5/0x330
? irq_work_queue+0x39/0x50
? __wake_up_klogd.part.0+0x79/0xc0
? mem_allocator_disconnect+0x73/0x150
mem_allocator_disconnect+0x73/0x150
? __pfx_mem_allocator_disconnect+0x10/0x10
? mark_held_locks+0xa5/0xf0
? rcu_is_watching+0x11/0xb0
page_pool_release+0x36e/0x6d0
page_pool_destroy+0xd7/0x440
xdp_unreg_mem_model+0x1a7/0x2a0
? __pfx_xdp_unreg_mem_model+0x10/0x10
? kfree+0x125/0x370
? bnxt_free_ring.isra.0+0x2eb/0x500
? bnxt_free_mem+0x5ac/0x2500
xdp_rxq_info_unreg+0x4a/0xd0
bnxt_free_mem+0x1356/0x2500
bnxt_close_nic+0xf0/0x3b0
? __pfx_bnxt_close_nic+0x10/0x10
? ethnl_parse_bit+0x2c6/0x6d0
? __pfx___nla_validate_parse+0x10/0x10
? __pfx_ethnl_parse_bit+0x10/0x10
bnxt_set_features+0x2a8/0x3e0
__netdev_update_features+0x4dc/0x1370
? ethnl_parse_bitset+0x4ff/0x750
? __pfx_ethnl_parse_bitset+0x10/0x10
? __pfx___netdev_update_features+0x10/0x10
? mark_held_locks+0xa5/0xf0
? _raw_spin_unlock_irqrestore+0x42/0x70
? __pm_runtime_resume+0x7d/0x110
ethnl_set_features+0x32d/0xa20

To fix this problem, it uses rhashtable_lookup_fast() instead of
rhashtable_lookup() with rcu_read_lock().
Using xa without rcu_read_lock() here is safe.
xa is freed by __xdp_mem_allocator_rcu_free() and this is called by
call_rcu() of mem_xa_remove().
The mem_xa_remove() is called by page_pool_destroy() if a reference
count reaches 0.
The xa is already protected by the reference count mechanism well in the
control plane.
So removing rcu_read_lock() for page_pool_destroy() is safe.(CVE-2024-43834)

In the Linux kernel, the following vulnerability has been resolved:

block: initialize integrity buffer to zero before writing it to media

Metadata added by bio_integrity_prep is using plain kmalloc, which leads
to random kernel memory being written media. For PI metadata this is
limited to the app tag that isn't used by kernel generated metadata,
but for non-PI metadata the entire buffer leaks kernel memory.

Fix this by adding the __GFP_ZERO flag to allocations for writes.(CVE-2024-43854)

In the Linux kernel, the following vulnerability has been resolved:

usb: vhci-hcd: Do not drop references before new references are gained

At a few places the driver carries stale pointers
to references that can still be used. Make sure that does not happen.
This strictly speaking closes ZDI-CAN-22273, though there may be
similar races in the driver.(CVE-2024-43883)

In the Linux kernel, the following vulnerability has been resolved:

Bluetooth: MGMT: Add error handling to pair_device()

hci_conn_params_add() never checks for a NULL value and could lead to a NULL
pointer dereference causing a crash.

Fixed by adding error handling in the function.(CVE-2024-43884)

In the Linux kernel, the following vulnerability has been resolved:

padata: Fix possible divide-by-0 panic in padata_mt_helper()

We are hit with a not easily reproducible divide-by-0 panic in padata.c at
bootup time.

[ 10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI
[ 10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1
[ 10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021
[ 10.017908] Workqueue: events_unbound padata_mt_helper
[ 10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0
:
[ 10.017963] Call Trace:
[ 10.017968] <TASK>
[ 10.018004] ? padata_mt_helper+0x39/0xb0
[ 10.018084] process_one_work+0x174/0x330
[ 10.018093] worker_thread+0x266/0x3a0
[ 10.018111] kthread+0xcf/0x100
[ 10.018124] ret_from_fork+0x31/0x50
[ 10.018138] ret_from_fork_asm+0x1a/0x30
[ 10.018147] </TASK>

Looking at the padata_mt_helper() function, the only way a divide-by-0
panic can happen is when ps->chunk_size is 0. The way that chunk_size is
initialized in padata_do_multithreaded(), chunk_size can be 0 when the
min_chunk in the passed-in padata_mt_job structure is 0.

Fix this divide-by-0 panic by making sure that chunk_size will be at least
1 no matter what the input parameters are.(CVE-2024-43889)

In the Linux kernel, the following vulnerability has been resolved:

tracing: Fix overflow in get_free_elt()

"tracing_map->next_elt" in get_free_elt() is at risk of overflowing.

Once it overflows, new elements can still be inserted into the tracing_map
even though the maximum number of elements (`max_elts`) has been reached.
Continuing to insert elements after the overflow could result in the
tracing_map containing "tracing_map->max_size" elements, leaving no empty
entries.
If any attempt is made to insert an element into a full tracing_map using
`__tracing_map_insert()`, it will cause an infinite loop with preemption
disabled, leading to a CPU hang problem.

Fix this by preventing any further increments to "tracing_map->next_elt"
once it reaches "tracing_map->max_elt".(CVE-2024-43890)

In the Linux kernel, the following vulnerability has been resolved:

ext4: sanity check for NULL pointer after ext4_force_shutdown

Test case: 2 threads write short inline data to a file.
In ext4_page_mkwrite the resulting inline data is converted.
Handling ext4_grp_locked_error with description "block bitmap
and bg descriptor inconsistent: X vs Y free clusters" calls
ext4_force_shutdown. The conversion clears
EXT4_STATE_MAY_INLINE_DATA but fails for
ext4_destroy_inline_data_nolock and ext4_mark_iloc_dirty due
to ext4_forced_shutdown. The restoration of inline data fails
for the same reason not setting EXT4_STATE_MAY_INLINE_DATA.
Without the flag set a regular process path in ext4_da_write_end
follows trying to dereference page folio private pointer that has
not been set. The fix calls early return with -EIO error shall the
pointer to private be NULL.

Sample crash report:

Unable to handle kernel paging request at virtual address dfff800000000004
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[dfff800000000004] address between user and kernel address ranges
Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 20274 Comm: syz-executor185 Not tainted 6.9.0-rc7-syzkaller-gfda5695d692c #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __block_commit_write+0x64/0x2b0 fs/buffer.c:2167
lr : __block_commit_write+0x3c/0x2b0 fs/buffer.c:2160
sp : ffff8000a1957600
x29: ffff8000a1957610 x28: dfff800000000000 x27: ffff0000e30e34b0
x26: 0000000000000000 x25: dfff800000000000 x24: dfff800000000000
x23: fffffdffc397c9e0 x22: 0000000000000020 x21: 0000000000000020
x20: 0000000000000040 x19: fffffdffc397c9c0 x18: 1fffe000367bd196
x17: ffff80008eead000 x16: ffff80008ae89e3c x15: 00000000200000c0
x14: 1fffe0001cbe4e04 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000001 x10: 0000000000ff0100 x9 : 0000000000000000
x8 : 0000000000000004 x7 : 0000000000000000 x6 : 0000000000000000
x5 : fffffdffc397c9c0 x4 : 0000000000000020 x3 : 0000000000000020
x2 : 0000000000000040 x1 : 0000000000000020 x0 : fffffdffc397c9c0
Call trace:
__block_commit_write+0x64/0x2b0 fs/buffer.c:2167
block_write_end+0xb4/0x104 fs/buffer.c:2253
ext4_da_do_write_end fs/ext4/inode.c:2955 [inline]
ext4_da_write_end+0x2c4/0xa40 fs/ext4/inode.c:3028
generic_perform_write+0x394/0x588 mm/filemap.c:3985
ext4_buffered_write_iter+0x2c0/0x4ec fs/ext4/file.c:299
ext4_file_write_iter+0x188/0x1780
call_write_iter include/linux/fs.h:2110 [inline]
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0x968/0xc3c fs/read_write.c:590
ksys_write+0x15c/0x26c fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__arm64_sys_write+0x7c/0x90 fs/read_write.c:652
__invoke_syscall arch/arm64/kernel/syscall.c:34 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:48
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:133
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:152
el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
Code: 97f85911 f94002da 91008356 d343fec8 (38796908)
---[ end trace 0000000000000000 ]---
----------------
Code disassembly (best guess):
0: 97f85911 bl 0xffffffffffe16444
4: f94002da ldr x26, [x22]
8: 91008356 add x22, x26, #0x20
c: d343fec8 lsr x8, x22, #3
* 10: 38796908 ldrb w8, [x8, x25] <-- trapping instruction(CVE-2024-43898)

In the Linux kernel, the following vulnerability has been resolved:

drm/amd/pm: Fix the null pointer dereference for vega10_hwmgr

Check return value and conduct null pointer handling to avoid null pointer dereference.(CVE-2024-43905)

In the Linux kernel, the following vulnerability has been resolved:

drm/amdgpu: Fix the null pointer dereference to ras_manager

Check ras_manager before using it(CVE-2024-43908)

In the Linux kernel, the following vulnerability has been resolved:

net: bridge: mcast: wait for previous gc cycles when removing port

syzbot hit a use-after-free[1] which is caused because the bridge doesn't
make sure that all previous garbage has been collected when removing a
port. What happens is:
CPU 1 CPU 2
start gc cycle remove port
acquire gc lock first
wait for lock
call br_multicasg_gc() directly
acquire lock now but free port
the port can be freed
while grp timers still
running

Make sure all previous gc cycles have finished by using flush_work before
freeing the port.

[1]
BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861
Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699

CPU: 1 PID: 9699 Comm: syz.5.1232 Not tainted 6.10.0-rc5-syzkaller-00021-g24ca36a562d6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:488
kasan_report+0xd9/0x110 mm/kasan/report.c:601
br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861
call_timer_fn+0x1a3/0x610 kernel/time/timer.c:1792
expire_timers kernel/time/timer.c:1843 [inline]
__run_timers+0x74b/0xaf0 kernel/time/timer.c:2417
__run_timer_base kernel/time/timer.c:2428 [inline]
__run_timer_base kernel/time/timer.c:2421 [inline]
run_timer_base+0x111/0x190 kernel/time/timer.c:2437(CVE-2024-44934)

In the Linux kernel, the following vulnerability has been resolved:

jfs: Fix shift-out-of-bounds in dbDiscardAG

When searching for the next smaller log2 block, BLKSTOL2() returned 0,
causing shift exponent -1 to be negative.

This patch fixes the issue by exiting the loop directly when negative
shift is found.(CVE-2024-44938)

In the Linux kernel, the following vulnerability has been resolved:

netfilter: ctnetlink: use helper function to calculate expect ID

Delete expectation path is missing a call to the nf_expect_get_id()
helper function to calculate the expectation ID, otherwise LSB of the
expectation object address is leaked to userspace.(CVE-2024-44944)

In the Linux kernel, the following vulnerability has been resolved:

kcm: Serialise kcm_sendmsg() for the same socket.

syzkaller reported UAF in kcm_release(). [0]

The scenario is

1. Thread A builds a skb with MSG_MORE and sets kcm->seq_skb.

2. Thread A resumes building skb from kcm->seq_skb but is blocked
by sk_stream_wait_memory()

3. Thread B calls sendmsg() concurrently, finishes building kcm->seq_skb
and puts the skb to the write queue

4. Thread A faces an error and finally frees skb that is already in the
write queue

5. kcm_release() does double-free the skb in the write queue

When a thread is building a MSG_MORE skb, another thread must not touch it.

Let's add a per-sk mutex and serialise kcm_sendmsg().

[0]:
BUG: KASAN: slab-use-after-free in __skb_unlink include/linux/skbuff.h:2366 [inline]
BUG: KASAN: slab-use-after-free in __skb_dequeue include/linux/skbuff.h:2385 [inline]
BUG: KASAN: slab-use-after-free in __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline]
BUG: KASAN: slab-use-after-free in __skb_queue_purge include/linux/skbuff.h:3181 [inline]
BUG: KASAN: slab-use-after-free in kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691
Read of size 8 at addr ffff0000ced0fc80 by task syz-executor329/6167

CPU: 1 PID: 6167 Comm: syz-executor329 Tainted: G B 6.8.0-rc5-syzkaller-g9abbc24128bc #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Call trace:
dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x178/0x518 mm/kasan/report.c:488
kasan_report+0xd8/0x138 mm/kasan/report.c:601
__asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381
__skb_unlink include/linux/skbuff.h:2366 [inline]
__skb_dequeue include/linux/skbuff.h:2385 [inline]
__skb_queue_purge_reason include/linux/skbuff.h:3175 [inline]
__skb_queue_purge include/linux/skbuff.h:3181 [inline]
kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691
__sock_release net/socket.c:659 [inline]
sock_close+0xa4/0x1e8 net/socket.c:1421
__fput+0x30c/0x738 fs/file_table.c:376
____fput+0x20/0x30 fs/file_table.c:404
task_work_run+0x230/0x2e0 kernel/task_work.c:180
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0x618/0x1f64 kernel/exit.c:871
do_group_exit+0x194/0x22c kernel/exit.c:1020
get_signal+0x1500/0x15ec kernel/signal.c:2893
do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249
do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148
exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline]
exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline]
el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598

Allocated by task 6166:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x40/0x78 mm/kasan/common.c:68
kasan_save_alloc_info+0x70/0x84 mm/kasan/generic.c:626
unpoison_slab_object mm/kasan/common.c:314 [inline]
__kasan_slab_alloc+0x74/0x8c mm/kasan/common.c:340
kasan_slab_alloc include/linux/kasan.h:201 [inline]
slab_post_alloc_hook mm/slub.c:3813 [inline]
slab_alloc_node mm/slub.c:3860 [inline]
kmem_cache_alloc_node+0x204/0x4c0 mm/slub.c:3903
__alloc_skb+0x19c/0x3d8 net/core/skbuff.c:641
alloc_skb include/linux/skbuff.h:1296 [inline]
kcm_sendmsg+0x1d3c/0x2124 net/kcm/kcmsock.c:783
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
sock_sendmsg+0x220/0x2c0 net/socket.c:768
splice_to_socket+0x7cc/0xd58 fs/splice.c:889
do_splice_from fs/splice.c:941 [inline]
direct_splice_actor+0xec/0x1d8 fs/splice.c:1164
splice_direct_to_actor+0x438/0xa0c fs/splice.c:1108
do_splice_direct_actor
---truncated---(CVE-2024-44946)

2. 影响范围

3. 影响组件

4. 修复版本

5. 修复方法

方法一：下载安装包进行升级安装
1、通过下载链接下载需要升级的升级包保存，如 xxx.rpm
2、通过rpm命令升级，如 rpm -Uvh xxx.rpm

方法二：通过软件源进行升级安装
1、保持能够连接上互联网
2、通过yum命令升级指定的包，如 yum install 包名

6. 下载链接

KY3.5.2:

x86_64:

     kernel   

     kernel-devel   

     kernel-headers   

     kernel-source   

     kernel-tools   

     kernel-tools-devel   

     perf   

     python3-perf   

aarch64:

     kernel   

     kernel-devel   

     kernel-headers   

     kernel-source   

     kernel-tools   

     kernel-tools-devel   

     perf   

     python3-perf